evaluation

The problem of the gate is hard to open the gate because the gate is dragged on ground and the gate is not strong enough to be a gate. So In ger district gate will design stronger, not dragged on ground.
This project is design gate or fence in ger district. I choose the gate. In my Cr.A I didn’t write test clearly. Next time I need to clear test for my project. In my Cr.B which is design I did I want to make. I made the gate in design not dragged on ground, strong enough and light to easy to open the gate. I did design well. In Cr.C which is plan I planed what I will do. But I have problem with adhesive so I change the adhesive to tape. And the dead line for Cr.D moved so I change the due date. In Cr.D I made gate what I designed in my design Cr.B but the gate looks like very thick and heavy. So In next time will made more thin and looks strong but strong enough.

Test Haram

Test the gate

Questions

1. How was it looks like?

2. Is it strong enough?

3. If you use the gate why use or why not use?

4. Does it look safe?

I choose these questions because I think these questions are important when build a gate. I think the ger district gate need to be stronger than now, look safe and not dragged.

Hayoung

1. I liked the color of it, and it looked thick and strong.

2. I think it’s strong and it’ll not fall apart and sink, because some strings are holding the gate. But at the same time I am not sure if it is strong or not because it is not made with strong materials.

3. I am not sure with this one too, because I can’t tell how much it will cost.

4. It looks safe, but I don’t think it actually will be, because of the materials used.

Beka

1. It looked good and really nice and modern.

2. It looks strong but if you had used wires or rubbers instead of strings it might have been better.

3. Yes, I would use the gate since the gate is off the ground which will not sink or be broken too easily.

4. Yes, it does look safe but it might have been better if you put something under the gate and the door. Although it might not sink, people or stray animals might go under it. Overall it looks good and safe.

Hyeji

1. It looked strong and modern

2. It looks strong enough and too thick. But it will be so heavy to control it. so it is better to put casters.

3. Maybe not actually it looks so strong but it is too thick so it will not easy to control. Also it looks kind of jail’s gate. It will uncomfortable to use.

4. Yes it looked safe but it is going to be so heavy because you’re using so much maters.

Changes

Dates	Time	Steps	Resources	Materials
November 19, 2009	22:00 – 22:10	Print final design what I did in criteria B. Take pictures.	The final design which I chose from Criteria B.	One A4 Paper, printer, computer, final sketch from Criteria B and Camera.
November 19, 2009	22:10 – 23:10	Starts build the structure for the gate. Make the 3 poles which hold the gate with some wood sticks. Take pictures. Cut the Styrofoam in proper size for ground	final design	6 wood sticks, One big sheet Styrofoam board, One big sheet of Styrofoam, and Camera.
November 19, 2009	23:10-00:00	Cut the Styrofoam in proper size for small gate for human and big gate for car. Cover the cutting side of Styrofoam with Styrofoam board with use tape. Make a hole for check whose is outside of door. Make 9 hinges with tape. Use tape hinges for attach the Styrofoam gates with the poles. Take pictures.	final design	One big sheet of Styrofoam, A sheet of Styrofoam board, Tape as much as needed and Camera.
November 20, 2009	09:30-10:30	Make 2 small holes on each big gate. One hole on vertex of on gate and other hole on middle of edge of big gate. Make a wire with thread. Make two small rings with paper clips. Use adhesive to attach the two small rings on top of the big gate post. Connect thread wire ring to 2 small holes on each big gate. Take pictures.	final design	One meter thread Adhesive, 2 paper clips and Camera
November 20, 2009	10:30-11:30	Make bell with small piece of Styrofoam and attach on gate. Make hook for lock the doors with paper clips. Take pictures.	final design	5 paper clips, A small piece of Styrofoam, adhesive, and Camera.
November 20, 2009	11:00-12:00	Type the whole process and add some pictures.		Computer (MS Word), some pictures which I took while building the gate.

Cr. D

Answer the questions.

1. What steps did you take to make your product, from beginning to end?

I took 2 days for made gate miniature. I use Styrofoam, Styrofoam board, tape as much as needed, adhesives, wood chopstick and paper clip as much as needed.

First, I cut the Styrofoam for ground.

Second, I post the wood chopstick for gate post. I post pair of chopstick because I think a side of chopstick is week to gold the gate.

Third, I made the small gate. I cut Styrofoam board two same shape, and made a small square each Styrofoam board for check who’s outside of gate. I cut Styrofoam for between two Styrofoam boards. I need to attach the Styrofoam and Styrofoam board with adhesives but I saw adhesives melt the Styrofoam when Yeajun attach gate post and Styrofoam ground. So I use tape when I made gate. And attach the Styrofoam small gate with post use tape.

Firth, I made lock for small gate with paper clips.

These are what I did in 1 day.

In 2 day

First, I made big gate. I cut Styrofoam board four same shape, and mad a small hole each for string. In my plan I planned each gates have Styrofoam between two Styrofoam boards. But cutting Styrofoam same thick size is hard so I cover inside of gate with Styrofoam boards. And attached all stuff together with tape. And throw the strings each gates.

Second, I made two rings for each string of gate with paper clip and attach it top of the post with using adhesives.

Third, attach the gate with post with tape and connect the strings to rings.

Fourth, made lock for big gate with paper clips. I made lock bigger than small gate lock.

2. What went well?

All 3 piece of gate are went well and strings and rings are also went well

3. What went wrong and how did you fix?

When big lock attach to big gate, I use adhesive a lot so part of gate melt and it looks like I push the gate with thumb. So I attached little piece of Styrofoam board.

4. If you had it to do over again, what would you do?

I will do all same but I will use other adhesive.

Cr. D

criterion C

Dates	Time	Steps	Resources	Materials
November 13, 2009	13:00 – 13.10	Print final design what I did in criteria B. Take pictures.	The final design which I chose from Criteria B.	One A4 Paper, printer, computer, final sketch from Criteria B and Camera.
November 13, 2009	13:10 – 14:00	Starts build the structure for the gate. Make the 3 poles which hold the gate with some wood sticks. Use adhesive, cover the 3 poles with thick papers. Take pictures.	final design	6 wood sticks, One big sheet of thick paper, adhesive and Camera.
November 13, 2009	14:00-15:30	Cut the Styrofoam in proper size for small gate for human and big gate for car. Cover the cutting side of Styrofoam with thick paper with use tape. Make a hole for check whose is outside of door. Make 9 hinges with tape. Use tape hinges for attach the Styrofoam gates with the poles. Take pictures.	final design	One big sheet of Styrofoam, A sheet of thick paper, Tape as much as needed and Camera.
November 13, 2009	15:30-16:30	Make 2 small holes on each big gate. One hole on vertex of on gate and other hole on middle of edge of big gate. Make a wire with thread. Make two small rings with paper clips. Use adhesive to attach the two small rings on top of the big gate post. Connect thread wire ring to 2 small holes on each big gate. Take pictures.	final design	One meter thread Adhesive, 2 paper clips and Camera
November 13, 2009	16:30-17:	Make bell with small piece of Styrofoam and make holder for bell with paper clip. Make hook for lock the doors with paper clips. Take pictures.	final design	5 paper clips, A small piece of Styrofoam and Camera.
November 16, 2009	9:00-10:00	Type the whole process and add some pictures.		Computer (MS Word), some pictures which I took while building the gate.

Gate #1, #2, #3

Final gate

#3 gate

# 2 Gate

#1 gate

Criterion B design

#1 gate

This gate will not drag on the ground. The big gate will have a 2 doors each door will have 3 big string hinges. There will also be 2 wires to hold the gate. The wires are hanged from the gate post. Wires help to not drag on the ground. The small gate for people will have 3 big strong hinges. The gate will be made of two Sheets of iron and Styrofoam. The Styrofoam will be between two sheets of iron. The sheets of iron will help the gate to be stronger. The Styrofoam makes the gate thicker and stronger. Styrofoam is light so it will not affect much to weight of the gate. If the gate’s weight is light, it will easy to open and easy to hold not drag on the ground.

Gate will never dragged on ground because of wires. But someone cut the wire, the gate will dragged on the ground but the wire is hard to cut, so it will not dragged on the ground.

#2 gate

This gate will not drag on the ground. The big gate will have a 2 doors each door will have 3 big string hinges. There will also 1 wheel for each door. The wheels help to not drag on the ground. The small gate for people will have 3 big strong hinges. The gate will be made of two Sheets of iron and Styrofoam. The Styrofoam will be between two sheets of iron. The sheets of iron will help the gate to be stronger. The Styrofoam makes the gate thicker and stronger. Styrofoam is light so it will not affect much to weight of the gate. If the gate’s weight is light, it will easy to open and easy to hold not drag on the ground.

Gate will never dragged on ground because of wheel, but rocks and rough land make the gate little hard to open it. It has the door ball.

#3 gate

This gate will not drag on the ground. The big gate will have a door with 4 little wheels. The big gate is sliding gate. It has a 10m long rail. Rail and wheels help to not dragged on the ground.

Sliding door can save the dead space, but it need long space to build the rail. If the gate size is 5m long, the rail size will be 10m long. So it’s hard to build the rail. And small rocks and sand will make the little hard to open.

Final Gate

I will compare with #1 and #2 gate. I will get the bell form the #2 gate and make the ball on #1 gate. The gate will not drag on the ground, it’s easy to open the gate, the gate is strong enough to not break easily and the bell will easy to find. Its cost will not very expensive.