Changes

Dates	Time	Steps	Resources	Materials
November 19, 2009	22:00 – 22:10	Print final design what I did in criteria B. Take pictures.	The final design which I chose from Criteria B.	One A4 Paper, printer, computer, final sketch from Criteria B and Camera.
November 19, 2009	22:10 – 23:10	Starts build the structure for the gate. Make the 3 poles which hold the gate with some wood sticks. Take pictures. Cut the Styrofoam in proper size for ground	final design	6 wood sticks, One big sheet Styrofoam board, One big sheet of Styrofoam, and Camera.
November 19, 2009	23:10-00:00	Cut the Styrofoam in proper size for small gate for human and big gate for car. Cover the cutting side of Styrofoam with Styrofoam board with use tape. Make a hole for check whose is outside of door. Make 9 hinges with tape. Use tape hinges for attach the Styrofoam gates with the poles. Take pictures.	final design	One big sheet of Styrofoam, A sheet of Styrofoam board, Tape as much as needed and Camera.
November 20, 2009	09:30-10:30	Make 2 small holes on each big gate. One hole on vertex of on gate and other hole on middle of edge of big gate. Make a wire with thread. Make two small rings with paper clips. Use adhesive to attach the two small rings on top of the big gate post. Connect thread wire ring to 2 small holes on each big gate. Take pictures.	final design	One meter thread Adhesive, 2 paper clips and Camera
November 20, 2009	10:30-11:30	Make bell with small piece of Styrofoam and attach on gate. Make hook for lock the doors with paper clips. Take pictures.	final design	5 paper clips, A small piece of Styrofoam, adhesive, and Camera.
November 20, 2009	11:00-12:00	Type the whole process and add some pictures.		Computer (MS Word), some pictures which I took while building the gate.